RECOATING MEMBRANE CELL ANODE & CATHODE
Ti Anode Fabricators Pvt. Ltd, a well-equipped in plant facilitated company delivering DSA Titanium anodes and Nickel cathodes – Design, Supply, Refurbishment, Recoated and Zero gap Retrofitting by using Precious metal oxides of… Iridium, Ruthenium, Platinum, Palladium, etc. We take this opportunity and pleased to inform you that, since 1992.....
Features of Anode coating:
Very low oxgen coating with slightly higher chlorate inefficiency. Suitable for all technologies such as UHDE, CEC, Asahi Glass, Lurgi, ELTECH & etc.Suitable for current densities in excess of 6 kA/m2. Excellent stability of the MMO coated (Mixed Metal Oxide) titanium anode; consequently do not contaminate the electrolysis system, improving the products purity and maintenance costs. Allows controlled, minimal gap cells. Substantially reduced energy consumption. Improved product quality & Exhibit long life. Operate at low voltage. Minimize energy consuming side reactions. Improve tolerance of operational upsets.
Features of Cathode Coating:
Ti provides cathode coating for chlorine membrane cells. This platinum based electro - catalyst delivers the lowest hydrogen over-potential for maximum electrical savings. It is expected to give voltage savings of 280 mV vs. bare nickel cathodes. This translates to power consumption savings of 200 DC kW Hr / MT of chlorine. As current density increases, savings increase. Ti’s Cathode Coating also provides excellent wear resistance and long life through a permanent coating which causes no caustic contamination as compared to competitive coatings. Its performance is limited only by the impurities in the caustic circulation system. Ti’s coatings are more resistant than other cathode coatings to iron fouling.
Ti’s Cathode Coating can be applied over a variety of substrates including mesh, louvers, sheet, punched plate and screen and in all chlorine membrane technologies.
General Description:-
|
Material
|
Anode – Titanium sheet
Cathode – Nickel sheet
|
|
Quality
|
Anode- 64 Nos / Cathode – 64 Nos.
/Half Anode- 4 Nos / Half Cathode – 4 Nos.
|
|
Dimension and Shape
|
Different dimension and shape is available, or according to custom's /drawing
|
|
Anode
|
Cathode
|
Half Anode
|
Half Cathode
|
|
1220 x 320
|
1220 x 320
|
1220 x 320
|
1220 x 320
|
|
930 x 235
|
930 x 235
|
930 x 235
|
930 x 235
|
|
Working
Equipment
|
Chlorine / Caustic
|
|
Features
|
1. Low chlorine evolution voltage
2. Long lifetime
3. Light weight electrodes
4. Keep the operating voltage stably
5. Lower cell voltage over the life of the electrolyzer at current densities up to 4.72 kA/m2, although even higher current density has been demonstrated
|
|
Working Principle
|
a) By Electrolysis
b) The anode and cathode of electrolysis:
Cathode: As per ASTM B 265 Gr 2
Anode: As per ASTM B 162 Gr. 201
|
|
Quality Control
|
1. Coating thickness by volumetric method.
2. Coating peel-off test by sketch tape testing.
|
|
Packing
|
Plastic or paper as inside, carton or plywood case as outside, or according to client's demand
|
|
Manufacturer / Country of Origin
|
Ti Anode Fabricators
India.
|
please feel free to contact us chloralkali@tiaano.com or visit our webpage www.tianode.com
Will share our credentials (client list, performance certificate, etc.) based on email request.
Ti Anode Fabricators Pvt. Ltd.
No. 48, Noothanchary, Madambakkam,
Chennai - 600 126, I N D I A.
Email: chloralkali@tiaano.com Web: www.tianode.com
377cbb98-3873-489d-8838-1f83166f3b5a|0|.0|27604f05-86ad-47ef-9e05-950bb762570c