SUPPLY OF PLATINUM PLATED TITANIUM ANODES CAN MANUFACTURE BY SUBSTRATES IN THE FORM OF SHEET, ROD, WIRE AND PIPES.
Higher quality of end product due to homogeneous deposition of chromium, Chrome plating is essentially faster and a chrome layer is very even (cause an even current distribution and enable the use of a higher current density – due to the constant electrolyte flow through anode mesh).
Other than expanded mesh, anodes can manufacture by substrates in the form of sheet, rod, wire, or pipe. The standard platinum layer thickness is 2-7.5 MM maximum up to 20 MM.
The lifetime of Platinum plated titanium anodes is in particular dependent on the work medium (electrolyte) and the anodic current density. A longer service lifetime at even higher current densities (up to 10000 a/ M2) are achieved, when using in baths with low fluoride concentration. According to experience, the wear rate is approx. 1 to 4 grams of platinum per one million ampere hours in fluoride-free chromium baths.
Compared to platinum plated titanium anodes, platinized niobium anodes have a significantly higher breakdown voltage. In case of specific current densities of over 75 a/dm2 or upon the use of baths containing fluoride, we recommend the use of platinum plated niobium anodes.
Please feel free to contact us chloralkali@tiaano.com
Will share our credentials (client list, performance certificate, etc.) based on email request.
Ti Anode Fabricators Pvt. Ltd.
No. 48, Noothanchary, Madambakkam,
Chennai - 600 126, I N D I A.
Email:chloralkali@tiaano.com webpage: www.tiaano.com.
2a2d5ca9-d885-44f8-ba27-1becd111ddfb|0|.0|27604f05-86ad-47ef-9e05-950bb762570c